Manufacturer Offers Solid Color Epoxy Powder Coating with Electrostatic Spray

Epoxy powder coatingThis series of products is based on epoxy resin and curing agent.It is a thermosetting powder coating with good physical properties, chemical properties and decorative properties. Suitable for the coating of indoor metal products.Powder characteristicsChemical type: epoxy typeSpecific gravity: 1.3-1.6g/CM3Par

Featured Products

Epoxy powder coating
This series of products is based on epoxy resin and curing agent.It is a thermosetting powder coating with good physical properties, chemical properties and decorative properties. Suitable for the coating of indoor metal products.
Powder characteristics
Chemical type: epoxy type
Specific gravity: 1.3-1.6g/CM3
Particle size: suitable for high voltage static or friction gun spraying
Pretreatment
1 zinc phosphating (minimum 6μm)
2 iron phosphating (minimum 6μm)
3 The working surface should be treated with derusting, degreasing, phosphating, etc., and the workpiece without surface chemical treatment is poor in corrosion resistance and other related performance is poor.
Application condition
Spray gun: electrostatic or friction spray gun
Thickness: average 60-80μm
Corona gun voltage: 60-80kv
Curing conditions: 200 ° C × 10 min (MT) / 180 ° C * 20 min (MT)
Performance data
Test itemsTest standardsmooth finishtexture finish
Gloss(60°)ISO 281315~95 unit3~15 unit
Film thicknessISO 236060~80 microns70~90 microns
Adhesion(1mm)ISO 24090 level0 level
Pencil hardnessASTM D-3363HH
CuppingISO 1520≥5mm≥5mm
Mandrel bendISO 1519≤5mm≤5mm
Impact(20inch.lbs)ASTM D-2794Direct and reverse passDirect and reverse pass
Baking temperature 200ºC/10min200ºC/10min
Note:
1. The above experiment uses a 0.5 mm rust-removing and degreasing cold-rolled steel plate with a thickness of 60-80 μm.

2. the performance index of the above coating film may change with the change of color and gloss
Health and Safety
This powder coating is a non-toxic product, but should avoid inhaling dust during use. It is recommended that operators wear appropriate dust masks and eyes. If possible, avoid long-term direct contact between skin and powder coatings.
Storage requirements
Store in a 28° C, Celsius, ventilated, dry, clean room in hell. Keep away from fire, heating, and direct sunlight. Do not stack in the open air. Under these conditions, the powder can be stored stably for 12 months. If it exceeds the storage period, it can be re-inspected. If the test results meet the requirements, they can still be used.
Other
This technical data is for users' reference. The specific indicators are obtained under certain conditions and represent the characteristics of typical products in this series. This technical data does not include powders with special effects. For such powders, please refer to the company's color card, or ask the company's business personnel.
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray

Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray
Packing :
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray

Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray


Salt spray report:
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray



Aging report:
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray
Manufacturers Supply Pure Epoxy Colourful Powder Coating with Electrostatic Spray

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours