Clirik pulverizer powder line from audited suppliers

Micro powder production line:-- five models: HGM80, HGM90, HGM100, HGM100A, and HGM125--finished production fineness: 300meshes~3000meshes, 5-47 micron--the capacity (ton/hour) ranges from 0.4T/H to 12T/H Application of micro powder production line:HGM Series Micro powder production line is the equipment specializing i

Featured Products


Micro powder production line:
-- five models: HGM80, HGM90, HGM100, HGM100A, and HGM125
--finished production fineness: 300meshes~3000meshes, 5-47 micron
--the capacity (ton/hour) ranges from 0.4T/H to 12T/H
 Clirik Powder Grinding Mill Powder Production Line by Audited Supplier

Application of micro powder production line:
HGM Series Micro powder production line is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.
 
Work Principle of micro powder production line:
HGM series micro powder production line mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.
 Clirik Powder Grinding Mill Powder Production Line by Audited Supplier
Videos of Work Principle:
https://shclirik.en.made-in-china.com
https://shclirik.en.made-in-china.com

 
Features of micro powder production line:
High Efficiency
Under the same finished final size and the same motor power, the capacity of micro powder production line is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.
High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
High fineness, flexible adjustment
The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.
Environment-friendly
The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
Advanced intelligent speed control device
Convenient adjusting, more uniform particle size.
 Clirik Powder Grinding Mill Powder Production Line by Audited Supplier
Clirik Powder Grinding Mill Powder Production Line by Audited Supplier
Main specification of micro powder production line:

Model
HGM80HGM90HGM100HGM125HGM168L
Ring Diameter(mm)800900100012501680
Ring Number (PCS)334444
Roller Number(PCS)18-2124-2928-3630-4430-40
Main Shaft Speed (r. p. min)230-240200-220180-200135-155120-130
Input Size (mm)≤10≤10≤15≤15≤20
Finished Size (um/mesh)May-74May-74May-74100-6100-9
(200-2500)(200-2500)(200-2500)(150-2000)(150-1500)
Capacity (t/h)0.4-4.50.6-6.5192163.8-30
Outlet Size L*W*H (m)13.9*4*6.214.7*4.8*7.218*4.6*8.614*9*10.2526.3*7.5*11.9
 

Unit: KW
HGM80HGM90HGM100HGM125HGM168L
Main Unit55-752*45132185-200315
Classifier18.518.53037-4*155*18.5
Blower4555752*45-2*552*75-2*90
Crusher18.518.518.54575
Bucket Elevator33447.5
BeltConveyor Feeder2.22.22.233
Spiral Conveyor33342*32*5.5
Discharging Valve2*0.751*0.75  1*1.12*1.12*1.12*0.75-2*1.5
Air compressor1115222*15-3755

Note: This specification is just referencing, any changes are subject to the products.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours